2011 Mercedes CLS-Class Owner's Manual - Page 51

219_AKB; 4; 54, en-US d2ureepe, 2009-05-11T16:21:02+02:00 - Seite 49 Version: 2.11.8.1 Occupant safety If you and/or your passenger release the seat belt during driving, the seat belt telltale 7 starts flashing and the warning chime sounds as described before. If the driver's or the front passenger's seat belt remains unfastened after 60 seconds, the warning chime stops sounding, the seat belt telltale 7 stops flashing but continues to be illuminated. After a vehicle standstill, the warning chime is reactivated and the seat belt telltale 7 is flashing again if the vehicle speed once exceeds 15 mph (25 km/h). The seat belt telltale 7 will only go out if both the driver's and the front passenger's seat belt (with the front passenger seat occupied) are fastened, or the vehicle is standing still and a front door is opened. For more information, see "Practical hints" (Y page 253). In an impact, the ETDs remove slack from the seat belts in such a way that the seat belts fit more snugly against the body. Seat belt force limiters, when activated, are employed to help reduce the peak force exerted by the seat belts on occupants during a crash. 49 i The ETDs do not correct an incorrect seat position or incorrectly worn seat belts. The ETDs do not pull occupants back toward the seat backrest. G Warning! Pyrotechnic ETDs that were activated must be replaced. For your safety, when disposing of the pyrotechnic ETDs always follow our safety instructions. These are available at any authorized Mercedes-Benz Center. Automatic comfort-fit feature seat belt An automatic comfort-fit feature for the front seats reduces the retracting force of the seat belts when they are in normal use. Emergency Tensioning Device (ETD), seat belt force limiter The seat belts for the front seats and rear outer seats are equipped with ETDs and seat belt force limiters. The ETDs are designed to activate in the following cases: Rin Rin Preventive occupant safety (PRESAFE®) The PRE-SAFE® system is intended to reduce the effects of an accident on vehicle occupants who are wearing their seat belt properly. Despite your vehicle being equipped with the PRE-SAFE® system, the possibility of personal injuries occurring as a result of an accident cannot be eliminated. Therefore, always drive carefully and adjust your driving to the prevailing road, weather, and traffic conditions. frontal or rear-end impacts exceeding the system's preset deployment threshold side impacts exceeding the system's preset deployment threshold on the far side of the impact certain vehicle rollovers G Warning! Rin Rif the restraint systems are operational and functioning correctly, see "SRS indicator lamp" (Y page 36) The ETDs for the front seats will only activate if the front seat belts are fastened (latch plate properly inserted into buckle). The ETDs for the rear outer seats will activate with or without the respective seat belts fastened. Z Safety and security