2011 Mercedes CLS-Class Owner's Manual - Page 79
2011 Mercedes CLS-Class Manual
Page 79 highlights
219_AKB; 4; 54, en-US d2ureepe, 2009-05-11T16:21:02+02:00 - Seite 77 Version: 2.11.8.1 Seats is switched on, have it checked and replaced if necessary. If a lamp in the instrument cluster remains on after starting the engine or comes on while driving, refer to "Lamps in instrument cluster" (Y page 251). 77 KEYLESS-GO start/stop button : USA only ; Canada only Seats Safety notes G Warning! In order to avoid possible loss of vehicle control the following must be done before the vehicle is put into motion: Rseat Position 0 Before you press the KEYLESS-GO start/stop button, the vehicle's on-board electronics have status 0 (as with SmartKey removed). adjustment restraint adjustment wheel adjustment of seat belts Position 1 X Rhead Press the KEYLESS-GO start/stop button once. This supplies power for some electrical consumers, e.g. wipers. Rsteering Rrear view mirror adjustment Rfastening i When you now press the KEYLESS-GO start/stop button Ronce more, the ignition (position 2) is switched on Rtwice more the power supply is again switched off Ignition (or position 2) X G Warning! Press the KEYLESS-GO start/stop button twice. This supplies power for all electrical consumers. When you switch on the ignition, all lamps in the instrument cluster come on. The lowbeam headlamp indicator lamp, high-beam headlamp indicator lamp, and turn signal indicator lamps will only come on if activated. If a lamp in the instrument cluster fails to come on when the ignition Do not adjust the driver's seat while driving. Adjusting the seat while driving could cause the driver to lose control of the vehicle. Never ride in a moving vehicle with the seat backrest in an excessively reclined position as this can be dangerous. You could slide under the seat belt in a collision. If you slide under it, the seat belt would apply force at the abdomen or neck. That could cause serious or fatal injuries. The seat backrest and seat belts provide the best restraint when the wearer is in a position that is as upright as possible and seat belts are properly positioned on the body. G Warning! Your seat must be adjusted so that you can correctly fasten your seat belt. Z Controls in detail i When you now press the KEYLESS-GO start/stop button once, the power supply is again switched off.