2011 Mercedes CLS-Class Owner's Manual - Page 89
2011 Mercedes CLS-Class Manual
Page 89 highlights
219_AKB; 4; 54, en-US d2ureepe, 2009-05-11T16:21:02+02:00 - Seite 87 Version: 2.11.8.1 Lighting Exterior lamp switch ! Failure to switch off the parking lamps when leaving the vehicle may result in a discharged battery. Low-beam headlamps The low-beam headlamps can be switched on and off with the exterior lamp switch. X Switch on the ignition. X Switching on: Turn the exterior lamp switch to position L. The following lamps come on: RLow-beam headlamps RTail 87 1 W Standing lamps, left 2 X Standing lamps, right 3 $ Off 4Ã 5T lamps lamps plate lamps panel lamps 6L 7N 8R Daytime running lamp mode Automatic headlamp mode Daytime running lamp mode Parking lamps (also tail lamps, license plate lamps, side marker lamps and instrument panel lamps) Low-beam headlamps or high-beam headlamps Front fog lamps Rear fog lamp RParking RLicense RSide marker lamps RInstrument RGreen indicator lamp T in the exterior lamp switch RGreen X indicator lamp L in the instrument cluster Switching off: Turn the exterior lamp switch to position $. i The exterior lamps (except standing lamps or parking lamps) go out automatically when you remove the SmartKey from the starter switch or open the driver's door with the ignition switched off. When the parking lamps or the rear fog lamp are switched on and you remove the SmartKey from the starter switch and open the driver's door, an acoustic signal sounds. In addition the message Switch Off Lights appears in the multifunction display. Switch off the parking lamps or the rear fog lamp manually. Automatic headlamp mode The following lamps come on and go out automatically depending on the brightness of the ambient light: RLow-beam RTail headlamps lamps lamps plate lamps RParking RLicense RSide marker lamps G Warning! If the exterior lamp switch is set to Ã, the headlamps will not automatically come on under foggy conditions. To minimize risk to you and to others, activate headlamps by turning exterior lamp switch to Z Controls in detail