1994 Pontiac Bonneville Owner's Manual - Page 74

You'll go right back up to your chosen To increase your speed in very small amounts, move the switch to ",/A" speed and stay there. Keep in mind that if you hold the switch at "R/A" longer than for less than half a second and then half a second, the vehicle will keep going release it. Each time you do this, your vehicle will go about 1 mph faster until you release the switch or apply (1.6 km/h) faster. the brake. You could be startled and even lose control. So unless you want to go The accelerate feature will only work faster, don't hold the switch at "R/A". after you have set the Cruise Control To Increase Speed While speed by pushing the "SET" button. Using Cruise Control To Resume a Set Speed There are two ways to go to a higher speed. Here's the first: To Reduce Speed Whjle Using 'Cruise Control 1, There are two ways to reduce your speed Suppose you set your Cruise Control at a 0 Use the accelerator pedal to get to the while using Cruise Control: desired speed and thenyou apply the higher speed. brake. This, of course, shuts off the Push in the button at the end &the Cruise Control. But you don't need to 0 Push the button at the end of the lever, lever until you reach ihe lowerspeed reset it. Onceyou're going about 25 mph , . then release the button and the you want, then release it. (40 km/h) or more, you can move the accelerator pedal. You'll now cruise at To slow down in very small amounts, Cruise Control switch from"ON" to the higher speed. push the button for less than half a "R/A" (Resume/Accelerate)for about half second. Each time you do this, you'll Here's the second way to go to a higher a second. go 1 mph (1.6 km/h) slower. speed: I 0 Move the Cruise switch from "ON" to "R/A". Hold it there until you get up t the speed you want, and then o release the switch.