3Ware 9550SXU16MLB10 User Guide - Page 142
Verifying a Unit through 3BM, Stop Verify, Enter, Maintain Unit, Maintain Disk Array, Verify Array
UPC - 693494971613
View all 3Ware 9550SXU16MLB10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Maintaining Units immediately. If verify scheduling is enabled, the unit will not start actively verifying until the next scheduled time. A Stop Verify link appears next to the unit on the Maintenance page. If you need to stop the verify process, use this link. (If initialization starts because the unit had not previously been initialized, it cannot be halted, so no Stop Verify link appears.) Verifying a Unit through 3BM 1 At the main 3BM screen, select the unit by highlighting it and pressing Enter. An asterisk appears in the left-most column to indicate that it is selected. 2 Tab to the Maintain Unit button and press Enter. 3 On the Maintain Disk Array screen, review the information about the unit to make sure it is the one you want to verify. 4 Tab to the Verify Array field, change the setting to Yes. Figure 50. Verifying a Unit 5 Tab to the OK button and press Enter again to select it. Verification of the selected unit starts immediately. 136 3ware 9000 Series Serial ATA RAID Controller User Guide