3Ware 9550SXU16MLB10 User Guide - Page 169

AEN Messages AEN Messages AEN (automatic event notifications) are messages issued by the 3ware RAID controller when an error is detected such or when an action is completed. These are summarized in Table 7. Descriptions of each are provided at the end of the table. If you use 3DM 2, AEN messages are displayed on the Alarms page. If you use the CLI, AEN messages can be listed using the show alarms command. On the 3DM 2 Alarms page, the AEN number is the last few digits within the parentheses at the beginning of the message description. For example, in the string (0x04:0x002B), "2B" is the AEN number. To find additional information about the AEN 2B, you would look up 02Bh on the pages below. Table 7: AEN Error Messages Value 001h 002h 003h 004h 005h 006h 007h 008h 009h 00Ah 00Bh 00Ch 00Eh 00Fh 021h 022h Message AEN SOFT_RESET AEN_DEGRADED_UNIT AEN_CONTROLLER_ERROR AEN_REBUILD_FAIL AEN_REBUILD_DONE AEN_INCOMP_UNIT AEN_INIT_DONE AEN_UNCLEAN_SHUTDOWN AEN_APORT_TIMEOUT AEN_DRIVE_ERROR AEN_REBUILD_STARTED AEN_INIT_STARTED AEN_INIT_FAILED AEN_SMART_FAIL AEN_UDMA_DOWNGRADE AEN_UDMA_UPGRADE www.3ware.com 163