Asus A8R-MVP A8R-MVP User's Manual for English Edtion - Page 47

• For a fully-configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 400 W. • Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot up. • Make sure to connect the EZ Plug™ when using two PCI Express graphcis card and a 20-pin ATX power supply unit; otherwise, the system will be unstable. • The ATX 12 V Specification 2.0 compliant (400 W) PSU has been tested to support the below configuration: CPU: Memory: Graphics card: Hard disk: ATAPI: AMD FX-57 512 MB DDR (x4) PCI Express x16 ATI X850 SATA HD (x2) CD-ROM (x1) • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • If you want to use the ATI CrossFire™ Graphics solution, use a PSU with 500 ~ 600 W power to ensure system stability. 7 . GAME/MIDI port connector (16-1 pin GAME) This connector is for a GAME/MIDI port. Connect the USB/GAME module cable to this connector, then install the module to a slot opening at the back of the system chassis. The GAME/MIDI port connects a joystick or game pad for playing games, and MIDI devices for playing or editing audio files. +5V J1B2 J1CY GND GND J1CX J1B1 +5V A8R-MVP ® A8R-MVP Game connector GAME ASUS A8R-MVP MIDI_IN J2B2 J2CY MIDI_OUT J2CX J2B1 +5V 2-25