Asus A8R-MVP A8R-MVP User's Manual for English Edtion - Page 76
PEG Link Mode [Auto]
View all Asus A8R-MVP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
DDR Voltage [Auto] Allows you to set the DDR memory voltage. Configuration options: [Auto] [2.65 V] [2.70 V] [2.80 V] [2.85 V] [2.90 V] [3.00 V] [3.10 V] [3.20 V] Setting a very high voltage may damage the component permanently. Setting a very low voltage may cause the system to become unstable. PCI-Express Voltage [+1.20V] Allows you to set the PCI Express voltage. Configuration options: [+1.20V] [+1.30V] [+1.40V] [+1.50V] Setting a very high voltage may damage the component permanently. Setting a very low voltage may cause the system to become unstable. VCORE Over-voltage [Disable] Allows you to enable or disable VCORE over-voltage. Configuration options: [Disable] [Enable] Southbridge Over-voltage [Disable] Configuration options: [Auto] [Disable] [Enable] PEG Link Mode [Auto] Sets the PCI Express graphics (PEG) link mode. Setting this item to [Auto] allows the motherboard to automatically adjust the PCI Express graphics link mode to the correct frequency based on the system configuration. Three additional settings are available for overclocking the PEG Link Mode. Configuration options: [Auto] [Disabled] [Normal] [Fast] [Faster] PEG Buffer Length [Auto] Allows you to set the PEG buffer length. Configuration options: [Auto] [Short] [Long] [Longer] [Longest] 4-20 Chapter 4: BIOS setup