Bosch VIPX1 Operation Manual - Page 119
Connect on alarm, Connecting with a terminal program, Closing the connection with a terminal program
View all Bosch VIPX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
VIP X1 | Installation and Operating Manual EN | 119 Connect on alarm With the appropriate configuration, a connection between a sender and a receiver is made automatically when an alarm is triggered (see page 70). After a short time the live video image from the sender appears on the connected monitor. This option can also be used to connect a sender and a compatible receiver using a switch connected to the alarm input. You do not need a computer to make the connection in this case. Connecting with a terminal program Various requirements must be met in order to operate with a terminal program (see page 129). - Start the terminal program and enter the command 1 in the main menu to switch to the IP menu. - Enter the command 4 in the IP menu to change the remote IP address, then enter the IP address of the unit you wish to connect to. - Return to the main menu by entering the command 0. Then enter the command 4 to switch to the Rcp+ menu. - In the Rcp+ menu, enter the command 5 to activate the automatic connection. Closing the connection with a terminal program - Start the terminal program (see page 129) and enter the command 4 in the main menu to switch to the Rcp+ menu. - In the Rcp+ menu, enter the command 5 to deactivate the automatic connection. Bosch Security Systems | 2006-12 | V2.5 Operation