Bosch VIPX1 Operation Manual - Page 76
Tamper detection, Sensitivity:, Trigger delay (sec):, Scene too bright, Scene too dark
View all Bosch VIPX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
EN | 76 Installation and Operating Manual | VIP X1 Tamper detection You can reveal the tampering of cameras and video cables by means of various options. Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended. Note The options for tamper detection can only be set for fixed cameras. Dome cameras or other motorized cameras cannot be protected in this manner as the movement of the camera itself causes changes in the video image that are too great. Sensitivity: Note This and the following parameter are only accessible if the reference check is activated. The basic sensitivity of the tamper detection can be adjusted for the environmental conditions to which the camera is subject. The algorithm reacts to the differences between the reference image and the current video image. The darker the observation area, the higher the value that must be selected. Trigger delay (sec): You can set delayed alarm triggering. The alarm is only triggered after a set time interval in seconds has elapsed and then only if the triggering condition still exists. If the original condition has been restored before this time interval elapses, the alarm is not triggered. This allows you to avoid false alarms triggered by short-term changes, for example cleaning activities in the direct field of vision of the camera. Scene too bright Activate this function if tampering associated with exposure to extreme light (for instance, shining a flashlight directly on the objective) should trigger an alarm. The average brightness of the scene provides a basis for recognition. Scene too dark Activate this function if tampering associated with covering the objective (for instance, by spraying paint on it) should trigger an alarm. The average brightness of the scene provides a basis for recognition. Configuration using a Web browser Bosch Security Systems | 2006-12 | V2.5