Bosch VIPX1 Operation Manual - Page 70
Alarm connections, Connect on alarm:, Number of destination IP address:, Destination IP address:
View all Bosch VIPX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
EN | 70 Alarm connections Installation and Operating Manual | VIP X1 You can select how the VIP X1 responds to an alarm. In the event of an alarm, the unit can automatically connect to a pre-defined IP address. You can enter up to 10 IP addresses to which the VIP X1 will connect in sequence in the event of an alarm, until a connection is made. Connect on alarm: Select On so that the VIP X1 automatically connects to a predefined IP address in the event of an alarm. By setting Follows input 1 the unit maintains the connection that has been automatically established for as long as an alarm exists on alarm input 1. Note Stream 2 is always transmitted for alarm connections. Bear this fact in mind when assigning the profile (see page 42). Number of destination IP address: Specify the numbers of the IP addresses to be contacted in the event of an alarm. The unit contacts the remote stations one after the other in the numbered sequence until a connection is made. Destination IP address: For each number enter the corresponding IP address for the desired remote station. Configuration using a Web browser Bosch Security Systems | 2006-12 | V2.5