Bosch VIPX1 Operation Manual - Page 75

Min. object size: (MOTION+ only), Global change %: (MOTION+ only), Selecting the area (MOTION+ only)

Get Bosch VIPX1 PDF manuals and user guides View all Bosch VIPX1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

VIP X1 | Installation and Operating Manual EN | 75 Min. object size: (MOTION+ only) You can specify the number of sensor fields that a moving object must cover to generate an alarm. This setting prevents objects that are too small from triggering an alarm. A minimum value of 4 is recommended. This value corresponds to four sensor fields. Global change %: (MOTION+ only) You can define the percentage of sensor fields that must register a change simultaneously before generating an alarm. This setting is independent of the sensor fields selected under Select area. This option allows you to detect, independently of motion alarms, manipulation of the orientation or location of a camera resulting from turning the camera mounting bracket, for instance. Selecting the area (MOTION+ only) The areas of the image to be monitored by the motion detector can be selected. The video image is subdivided into 858 square sensor fields. You can activate or deactivate each of these fields individually. If you wish to exclude particular regions of the camera's field of view from monitoring due to continuous movement (by a tree in the wind, etc.), the relevant fields can be deactivated. - Click Select area to configure the sensor fields. A new window will open. - If necessary, click Clear all first to clear the current selection (fields marked red). - Left-click the fields to be activated. Activated fields are marked red. - If necessary, click Select all to select the entire video frame for monitoring. - Right-click any fields you wish to deactivate. - Click OK to save the configuration. - Click the close button (X) in the window title bar to close the window without saving the changes. Bosch Security Systems | 2006-12 | V2.5 Configuration using a Web browser

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
VIP X1
| Installation and Operating Manual
EN | 75
Bosch Security Systems | 2006-12 | V2.5
Configuration using a Web browser
Min. object size:
(MOTION+ only)
You can specify the number of sensor fields that a moving object must cover to
generate an alarm. This setting prevents objects that are too small from trigger-
ing an alarm.
A minimum value of
4
is recommended. This value corresponds to four sensor
fields.
Global change %:
(MOTION+ only)
You can define the percentage of sensor fields that must register a change
simultaneously before generating an alarm. This setting is independent of the
sensor fields selected under
Select area
.
This option allows you to detect, independently of motion alarms, manipulation
of the orientation or location of a camera resulting from turning the camera
mounting bracket, for instance.
Selecting the area
(MOTION+ only)
The areas of the image to be monitored by the motion detector can be selected.
The video image is subdivided into 858 square sensor fields. You can activate
or deactivate each of these fields individually. If you wish to exclude particular
regions of the camera's field of view from monitoring due to continuous move-
ment (by a tree in the wind, etc.), the relevant fields can be deactivated.
– Click
Select area
to configure the sensor fields. A new window will open.
–
If necessary, click
Clear all
first to clear the current selection (fields marked
red).
–
Left-click the fields to be activated. Activated fields are marked red.
–
If necessary, click
Select all
to select the entire video frame for monitoring.
–
Right-click any fields you wish to deactivate.
– Click
OK
to save the configuration.
–
Click the close button (
X
) in the window title bar to close the window without
saving the changes.