Bosch VIPX1 Operation Manual - Page 90
Port:, Streaming, Multicast packet TTL:, Enter the port address of the required stream here.
View all Bosch VIPX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
EN | 90 Installation and Operating Manual | VIP X1 With the setting 0.0.0.0 the encoder for the relevant stream operates in multi-unicast mode (copying of data streams in the unit). The VIP X1 supports multi-unicast connections for up to five simultaneously connected receivers. Note Duplication of data places a heavy demand on the unit and can lead to impairment of the image quality under certain circumstances. Port: Assign a different port to each data stream if there are simultaneous data streams at the same multicast address. Enter the port address of the required stream here. Streaming Click the checkbox to activate multicast streaming mode for the relevant stream. An enabled stream is indicated by a check mark. Multicast packet TTL: You can enter a value to specify how long the multicast data packets are active on the network. This value must be greater than one if multicast is to be run via a router. Configuration using a Web browser Bosch Security Systems | 2006-12 | V2.5