Bosch VIPX1 Operation Manual - Page 46
Video input, 75 Ohm termination:, Source type:, Camera
View all Bosch VIPX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
EN | 46 Video input Installation and Operating Manual | VIP X1 You can activate the 75 Ohm terminating resistor for the video input on the VIP X1. The terminating resistance must be deactivated for the video signal to be looped through. The video input is closed at the time of delivery. 75 Ohm termination: Select Off if the video signal is to be looped through. Source type: To allow video recorders to be connected as a video source, you can change the characteristic of the video source from the preset value of Camera to VCR. Video recorders require a more tolerant setting for the internal PLL as a result of jitter effects caused by the mechanical components of a video recorder. Note In some cases, selecting the VCR option can lead to an improvement in the video image even with a camera connected. Configuration using a Web browser Bosch Security Systems | 2006-12 | V2.5