Bosch VIPX1 Operation Manual - Page 47
Audio settings (audio version only), Line In 1: / Microphone (MIC):, Line Out/Speaker (SPK):
View all Bosch VIPX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
VIP X1 | Installation and Operating Manual Audio settings (audio version only) EN | 47 You can set the gain of the audio signals to suit your specific requirements. The current video image is shown in the small window next to the slide controls to help you check the selected audio source and improve assignments. Your changes are effective immediately. If you connect via Web browser you must activate the audio transmission on the Livepage configuration page (see page 94). For other connections the transmission depends on the audio settings of the respective system. Line In 1: / Microphone (MIC): You can set the gain of the audio signal for the line input and for the microphone input. Make sure that the display does not go beyond the green zone during modulation. Line Out/Speaker (SPK): You can set the gain of the line and loudspeaker output. Make sure that the display does not go beyond the green zone during modulation. Selection Click one of the option boxes and then click Set to display the level of the respective audio input for orientation and to set the gain. Bosch Security Systems | 2006-12 | V2.5 Configuration using a Web browser