Brother International BAS-326G PS Instruction Manual - English - Page 22
Connecting the ground wire, Ground wire from the machine head
View all Brother International BAS-326G PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
3. INSTALLATION 5. Close the cord presser plate (2) in the direction of the left arrow, and secure it by tightening the two screws (1). Note: Close the cord presser plate (2) securely so that no foreign objects, insects or small animals can get inside the control box. 6. Check that the cords do not get pulled, and then gently return the machine head to its original position. 2149B 3-9. Connecting the ground wire CAUTION Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric shock, and problems with correct operation may also occur. (1) Ground wire from upper shaft motor harness (2) Ground wire from the machine head (3) Ground wire from operation panel (4) Ground wires from two-pedal foot switch harnesses (2 wires) • Tighten the control box cover with the eight screws. Check that the cords are not clamped by the cover at this time. NOTE: Make sure that the ground connections are secure in order to ensure safety. 2150B 13 BAS-326G PS