Brother International BAS-326G PS Instruction Manual - English - Page 56

Reading all sewing data from the CF card at once, USING CF CARDS, End data read/write mode

Get Brother International BAS-326G PS PDF manuals and user guides View all Brother International BAS-326G PS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

7. USING CF CARDS *1 The sewing data that can be used with this sewing machine is data that has been created for the BAS-300G series. *2 Only valid when using an optional floppy disk drive. *3 Sewing data for the BAS-300 series, BAS-300A series and BAS-300E/F series can be read. *4 Refer to the instruction manual for the programmer for details of expansion option output. *5 Can be selected when memory switch No. 755 = ON. Save the expansion option output data (BAS900.SEQ) in the \BROTHER\ISM\ISMDB00 folder. 7-3-1. Reading all sewing data from the CF card at once 1 Select the [r 1] data read/write mode. 4576Q 2 Press the R/W key. • [-SEd] will change to [ ALL]. * If you press the or key to select the program numbers that you would like to read and then continue to carry out the following procedure, you can read the selected sewing data in separate lots. 4577Q 3 Press the R/W key. 4 End data read/write mode • The buzzer will sound and all sewing data will be loaded from the CF card and copied into the sewing machine's internal memory. • The program numbers that have been read will appear in the menu display. * If there is a large volume of data in the CF card, it will take some time for all of it to be read. To halt the reading of data, press the STOP switch. If you then press the RESET key, the display will change back to [ ALL]. Loading 4976Q Press the TEST key. Turn off the power switch, remove the CF card, and then close the cover of the CF slot. TEST indicator switches off 47 BAS-326G PS

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
7. USING CF CARDS
47
BAS-326G PS
*1
The sewing data that can be used with this sewing machine is data that has been created for the BAS-300G series.
*2
Only valid when using an optional floppy disk drive.
*3
Sewing data for the BAS-300 series, BAS-300A series and BAS-300E/F series can be read.
*4
Refer to the instruction manual for the programmer for details of expansion option output.
*5
Can be selected when memory switch No. 755 = ON.
Save the expansion option output data (BAS900.SEQ) in the \BROTHER\ISM\ISMDB00 folder.
7-3-1. Reading all sewing data from the CF card at once
1
Select the [r 1] data read/write mode.
2
Press the R/W key.
•
[-SEd] will change to [ ALL].
* If you press the
or
key to select the program
numbers that you would like to read and then continue
to carry out the following procedure, you can read the
selected sewing data in separate lots.
3
Loading
Press the R/W key.
•
The buzzer will sound and all sewing data will be
loaded from the CF card and copied into the sewing
machine's internal memory.
•
The program numbers that have been read will appear
in the menu display.
* If there is a large volume of data in the CF card, it will
take some time for all of it to be read. To halt the
reading of data, press the STOP switch. If you then
press the RESET key, the display will change back to
[ ALL].
4
End data read/write mode
TEST indicator switches off
Press the TEST key.
Turn off the power switch, remove the CF card, and then
close the cover of the CF slot.
4976Q
4576Q
4577Q