Brother International BAS-326G PS Instruction Manual - English - Page 37
Setting the X-scale and Y-scale, 5-5. Setting the sewing speed, After completing the setting
View all Brother International BAS-326G PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
5-4. Setting the X-scale and Y-scale 2157B 5. USING THE OPERATION PANEL (BASIC OPERATIONS) The scales are set to 100 (%) at the time of shipment from the factory. 1. Press the SELECT key (1) so that the X-SCALE indicator (2) (for X-scale setting) or the Y-SCALE indicator (3) (for Y-scale setting) is illuminated. • The setting value (%) will appear in the menu display (4). * When memory switch no. 402 is set to "ON", the settings will be displayed in units of mm. 2. Press the or key (5) to set the scale (0 − 400). • The program number will flash in the PROGRAM No. display (6). 3. Depress the work clamp switch (7) to lower the work clamp, and then depress the start switch (8). • The work clamp will move to the sewing start position, and then the scales will be applied. • The program number will stop flashing and illuminate steadily. NOTE: After completing the setting, be sure to refer to "5-6. Checking the sewing pattern" to check that the needle drop position is correct. 5-5. Setting the sewing speed The sewing speed is set to 2000 (sti/min) at the time of shipment from the factory. 1. Press the SELECT key (1) until the SPEED indicator (2) illuminates. • The setting value (sti/min) will appear in the menu display (3). 2. Press the or key (4) to set the sewing speed. (Sewing speed setting: 400 − 2700) 4956Q BAS-326G PS 28