Brother International BAS-326G PS Instruction Manual - English - Page 79
TROUBLESHOOTING, Problem, Cause, Remedy, Reference, Upper thread breaks., Skipped stitches occur.
View all Brother International BAS-326G PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
12. TROUBLESHOOTING Problem Upper thread breaks. Cause Upper thread tension is too strong. Remedy Adjust the upper thread tension. Reference P. 23 Needle is incorrectly installed. Install the needle correctly. P. 19 Thread is too thick for the needle. Select a thread that matches the needle. Thread take-up spring tension and Adjust the tension and height of the height are incorrect. thread take-up spring. Damage or burring of the rotary hook, needle hole plate, needle or thread path. Repair or replace the problem part. Thread breaking from heat (Synthetic thread). Use a needle cooler. Thread is threaded incorrectly. Thread the thread correctly. Damage to the hook stopper. Lower thread breaks. Lower thread tension is too strong. Buff the hook stopper to remove the damage, or replace the hook stopper. Adjust the lower thread tension. Damage to the needle hole plate or bobbin case. Repair or replace the problem part. Skipped stitches occur. Clearance between needle and rotary hook tip is too great. Adjust the needle clearance. Needle and incorrect. rotary hook timing is Adjust the needle bar lift amount. The needle guard is covering the needle more than necessary. Adjust the needle guard. Needle is bent. Replace the needle. P. 23 P. 54 P. 19 P. 19 P. 23 P. 56 P. 55 P. 55 Needle is broken. Needle is incorrectly installed. Install the needle correctly. Intermittent height of intermittent presser Adjust the intermittent height of the foot is too high. intermittent presser foot. Clearance between needle and rotary hook tip is too great. Adjust the needle clearance. Adjust the needle bar lift amount. P. 19 P. 30 P. 56 P. 55 Thread jamming. Needle is bent. Replace the needle. Needle deflection Needle is too thin. Select a needle that is suitable for the sewing conditions. Reduce the sewing speed. Select a needle that is suitable for the sewing conditions. Thread take-up spring tension and Adjust the tension and height of the height are incorrect. thread take-up spring. Needle and incorrect. rotary hook timing is Adjust the needle bar lift amount. P. 23 P. 23 P. 54 P. 55 BAS-326G PS 70