Brother International BE-1204B Stand Alone Type Instruction Manual - English - Page 162
The thread trimmer connecting rod A [2] has a backlash of about 0.1 ~ 0.2 mm back and forth.
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Chapter 8 Adjustment 2. Press the stop switch in order to ensure maximum safety during adjustment. Adjust the movable knife position in this state. W1267Q 3. Loosen two bolts [3] that connect the thread trimmer connecting rods B [1] and A [2]. 4. Tighten the two bolts [3] until the triangle part of the movable knife [4] is protuded by 1 mm from the fixed knife [5]. * Precautions for tightening the two bolts [3]: *Bad example [1] [3] [2] Toward this side W1319Q W1322Q • The thread trimmer connecting rod A [2] has a backlash of about 0.1 ~ 0.2 mm back and forth. Tighten the two bolts [3] while pulling them forward by the backlash amount. • Tighten the two bolts [3] so that the thread trimmer connecting rods A [2] and B [1] are positioned in a straight line. 8-10 BE-1204B-BC • BE-1206B-BC