Brother International BE-1204B Stand Alone Type Instruction Manual - English - Page 96
Thread Breakage Sensor, Setting of sensor validity/invalidity
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 5 Setting Thread Breakage Sensor Validity or invalidity and sensitivity of the thread breakage sensor can be set. Setting of sensor validity/invalidity ! This function is previously set to valid for all heads upon shipment. ! Each pressing on the ten keys or sensors in the following order: key will switch the combination of the thread breakage Upper thread sensor and lower thread sensor both valid Upper thread sensor valid, lower thread sensor invalid Invalid 1. Press . 2. Specify the number of a machine head by pressing ten keys and validate or invalidate the thread breakage sensor. Each pressing on ten keys will switch the setting to valid or invalid. Pressing on invalid. Heads with which the sensor is valid W0488Q key will switch the setting of the thread breakage sensor in each head to valid or W0489Q 3. Press . Modified setting is saved and the initial screen or halt screen is displayed again. Thread Breakage Sensitivity Sensitivity of the thread breakage sensor can be set. ! The sensitivity can be set within the range of 1 ~ 100. Sensitivity increases as the figure decreases. ! This function is previously set to 10 upon shipments. 1. Press twice. 2. Select the needle bar for which the sensitivity is modified by pressing . The number of needle bars changes in the sequence of : ALL (all needle bars) → 1 → 2 → ... 9 or 12 (max.) → ALL → ... Selected needle bar (All needle bars : Each needle bar : ) W0490Q 5-6 BE-1204B-BC • BE-1206B-BC