Brother International BE-1204B Stand Alone Type Instruction Manual - English - Page 40
Attachment of Embroidery Hoop and Frame, Tubular square hoop
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 1 Preparations of operation 4-4 Attachment of Embroidery Hoop and Frame ! Tubular square hoop [4] [1] [2] [5] [3] W1243Q 1. Loosen the thumb bolt M6 [1] to draw it to the center. 2. Align the positioning hole on the tubular round arm frame [4] with the positioning pin [3] (S58665) on the X-feed sash [5] (S58650), and fit the tubular round arm fixing nut [2] on the back side of the thumb bolt M6 [1] into the hole on the X-feed sash. 3. While keeping the nut in the hole, slide the thumb bolt M6 toward the edge and tighten it firmly at the outermost point. 1-20 BE-1204B-BC • BE-1206B-BC
1-20
BE-1204B-BC ° BE-1206B-BC
Chapter 1 Preparations of operation
4-4 Attachment of Embroidery Hoop and Frame
!
Tubular square hoop
W1243Q
1.
Loosen the thumb bolt M6 [1] to draw it to the center.
2.
Align the positioning hole on the tubular round arm frame [4] with the positioning pin [3] (S58665)
on the X-feed sash [5] (S58650), and fit the tubular round arm fixing nut [2] on the back side of the
thumb bolt M6 [1] into the hole on the X-feed sash.
3.
While keeping the nut in the hole, slide the thumb bolt M6 toward the edge and tighten it firmly at
the outermost point.
[1]
[2]
[4]
[3]
[5]