Brother International DCP-J152W Basic Users Guide - Page 46
Did You Change, Black, No Ink Cartridge, Cannot Detect, Wrong Ink Color - ink cartridges
View all Brother International DCP-J152W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
e Each color has its own correct position. Insert the ink cartridge in the direction of the arrow on the label. f Gently push the back of the ink cartridge -marked PUSH- until it latches, and then close the ink cartridge cover. g The machine will automatically reset the ink dot counter. NOTE • If you replaced an ink cartridge, for example Black, the LCD may ask you to verify that it was a brand new one (for example, Did You Change Black). For each new cartridge you installed, press + (Yes) to reset the ink dot counter for that color. If the ink cartridge you installed is not a brand new one, be sure to press - (No). • If the LCD displays No Ink Cartridge or Cannot Detect after you install the ink cartridge, check that the ink cartridge is installed correctly. Remove the ink cartridge and reinstall it slowly and firmly until it latches. IMPORTANT • DO NOT take out ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge. • DO NOT touch the cartridge insertion slots. If you do so, the ink may stain your skin. • If you mix the colors by installing an ink cartridge in the wrong position, the LCD displays Wrong Ink Color. Check which ink cartridges are not matched by color to their ink cartridge positions and move them to their correct positions. • Once you open an ink cartridge, install it in the machine and use it up within six months of installation. Use unopened ink cartridges by the expiration date written on the cartridge package. • DO NOT dismantle or tamper with the ink cartridge; this can cause the ink to leak out of the cartridge. 34