Brother International DCP-J152W Basic Users Guide - Page 71
Machine Information, Checking the serial number, Checking the firmware version, Reset functions
View all Brother International DCP-J152W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Machine Information B Checking the serial number B a Press Menu. b Press a or b to choose Machine Info. Press OK. c Press a or b to choose Serial No. Press OK. Your machine's serial number will appear on the LCD. d Press Stop/Exit. Checking the firmware version B a Press Menu. b Press a or b to choose Machine Info. Press OK. c Press a or b to choose Version. Press OK. Your machine's firmware version will appear on the LCD. d Press Stop/Exit. Troubleshooting Reset functions B The following reset functions are available: 1 Machine Reset You can reset all the machine's settings that you have changed, such as the Date and Time. 2 Network You can reset the print server back to its default factory settings. Network Reset will affect the password and IP address information. 3 All Settings You can restore all settings to the factory setting. Brother strongly recommends performing this procedure before handing over or disposing of the machine. How to reset the machine B B a Press Menu. b Press a or b to choose Initial Setup. Press OK. c Press a or b to choose Reset. Press OK. d Press a or b to choose the type of reset (Machine Reset, Network or All Settings) you want to use. Press OK. Press + to confirm. e Press + to reboot the machine. 59