Brother International DCP-J152W Basic Users Guide - Page 55
Black Start, Color Start, If a copy operation is in process, Stop/Exit, Error Message, Cause, Action
View all Brother International DCP-J152W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Error Message No Paper Fed Out of Memory Troubleshooting Cause Action The machine is out of paper or paper is not correctly loaded in the paper tray. Do one of the following: Refill the paper tray, and then press Black Start or Color Start. Remove and reload the paper, then press Black Start or Color Start. (See Loading paper and other print media on page 10.) The paper tray was not fully inserted. Remove the paper tray and re-install it until it locks into place, and then press Black Start or Color Start on the control panel. Paper dust has accumulated on the surface of the paper pick-up rollers. Clean the paper pick-up rollers. (See Advanced User's Guide: Cleaning the paper pick-up rollers.) The Jam Clear Cover is not closed correctly. Make sure the Jam Clear Cover is closed evenly at both ends. (See Printer jam or paper jam on page 45.) The paper is jammed in the machine. Remove the jammed paper by following the steps in Printer jam or paper jam on page 45. B If this error occurs often during 2-sided printing, the paper feed rollers may be stained with ink. Clean the paper feed rollers. (See Advanced User's Guide: Cleaning the paper feed rollers.) The machine's memory is full. If a copy operation is in process: Press Stop/Exit and wait until the other operations in process finish, and then try again. Press Black Start or Color Start to choose Partial Print to copy the pages scanned so far. 43