Brother International DCP-J152W Basic Users Guide - Page 58
Stop/Exit, head, unplug the machine from the power
View all Brother International DCP-J152W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
f Move the print head (if necessary) to take out any paper remaining in this area. Make sure that jammed paper is not left in the corners of the machine (1) and (2). 1 2 IMPORTANT • DO NOT touch the encoder strip (1). Doing this may cause damage to the machine. 1 • If the print head is in the right corner as shown in the illustration (2), you cannot move it. Re-connect the power cord. Hold down Stop/Exit until the print head moves to the center. Then unplug the machine from the power source and take out the paper. • If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper. Hold the concave areas with the triangle marks as shown in the illustration (3) to move the print head. 2 3 • If ink gets on your skin or clothing, immediately wash it off with soap or detergent. 46