Brother International IntelliFax-2840 Basic Users Guide - English - Page 78
Cleaning the scanner glass, b
View all Brother International IntelliFax-2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
a Press Clear. To confirm you are installing a new drum unit, press 1. b When the LCD shows Accepted, close the front cover. Cleaning the scanner glass A a Turn off the machine's power switch. Unplug the telephone line cord first, disconnect all cables, and then unplug the power cord from the AC power outlet. Note (For FAX-2840 and MFC-7240) To prevent you from losing any important messages, see Transferring your faxes or Fax Journal report uu page 74. b Lift the control panel cover (1). Carefully remove dirt from the glass strip (2) and the white bar (3) above it with a soft lintfree cloth moistened with water. c Close the control panel cover. Note In addition to cleaning the glass strip with a soft lint-free cloth moistened with water, run your finger tip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning. d Plug the machine's power cord back into the AC power outlet first, connect all cables, and then plug in the telephone line cord. Turn on the machine's power switch. 66