Brother International IntelliFax-2840 Basic Users Guide - English - Page 85
Error Message, Cause, Action, Replace Toner, Continue, Toner, Ended, Scan Unable XX, Size mismatch - error correction mode
View all Brother International IntelliFax-2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Troubleshooting Error Message Replace Toner Scan Unable XX Size mismatch Toner Ended Toner Low Cause Action The toner cartridge is at the end of its life. The machine will stop printing until you replace the toner cartridge. While memory is available, faxes will be stored in the memory. If you have set the Toner setting to Stop, replace the toner cartridge with a new and unused original Brother toner cartridge. This will reset the Replace Toner mode. (See Replacing the toner cartridge uu page 55.) If you have set the Toner setting to Continue, the machine will continue to print data until the LCD shows Toner Ended. For how to operate the machine in Continue mode, see Advanced User's Guide: Toner Settings. The machine has a mechanical problem. (For FAX-2840 and MFC-7240) See Transferring your faxes or Fax Journal report uu page 74 before disconnecting the machine so you will not lose any important messages. Then, turn the power switch off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on. (For FAX-2940) Turn the power switch off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on. If the problem continues, call Brother Customer Service. The paper in the tray is not a correct size. Load an appropriate size of paper in the tray, and re-set the "Paper Size" (Menu, 1, 2, 2). (See Paper Size uu page 16.) It is time to replace the toner cartridge. While memory is available, faxes will be stored in the memory. Replace the toner cartridge with a new one. (See Replacing the toner cartridge uu page 55.) If the LCD shows Toner Low you Order a new toner cartridge now so a can still print; however, the replacement toner cartridge will be available B machine is telling you that the when the LCD shows Replace Toner or toner cartridge is near the end of Toner Ended. its life. 73