Brother International MFC-9010CN Users Manual - English - Page 60
User Settings List, connect the interface cable.
UPC - 012502622383
View all Brother International MFC-9010CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
e Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2). 1 2 f Put the metal (2) and then the plastic (1) SO-DIMM covers back on. 2 1 g Plug the machine's power cord back into the AC power outlet first, and then connect the interface cable. h Turn on the machine's power switch. Note To make sure that you have installed the SO-DIMM properly, you can print the user settings page that shows the current memory size. (See User Settings List on page 105.) 48
48
e
Hold the SO-DIMM by the edges and
align the notches in the SO-DIMM with
the protrusions in the slot. Insert the
SO-DIMM diagonally (1), then tilt it
toward the interface board until it clicks
into place (2).
f
Put the metal
(2) and then the plastic
(1)
SO-DIMM covers back on.
g
Plug the machine’s power cord back into
the AC power outlet first, and then
connect the interface cable.
h
Turn on the machine’s power switch.
Note
To make sure that you have installed the
SO-DIMM properly, you can print the user
settings page that shows the current
memory size. (See
User Settings List
on page 105.)
1
2
1
2