Brother International MFC-9010CN Users Manual - English - Page 76
Black Start, Color Start, Error Message, Cause, Action, Print Unable XX, Registration, Replace Belt - canada
UPC - 012502622383
View all Brother International MFC-9010CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Error Message Print Unable XX Print Unable 1A Registration Replace Belt Replace Drums Replace Drum(X) 1 Replace Fuser Cause Action The machine has a mechanical problem. Do one of the following: Disconnect the machine from the power for several minutes, then reconnect it. If the problem continues, call Brother Customer Service. One of the issues that can cause this error is that condensation may form inside the machine after a room temperature change. Turn the power switch off and fully open the top cover. Leave the machine off and open for 30 minutes to remove any condensation from inside the machine, then close the top cover and turn it on again. If this does not clear the error, call Brother Customer Service. Registration failed. Press Black Start or Color Start and try again. Do one of the following: Turn off the machine's power switch. Wait a few seconds, then turn it on again. Try Manual Registration, Menu, 3, 7. (See Manual Registration on page 83.) Put in a new belt unit. (See Replacing the belt unit on page 96.) If the problem continues, call Brother Customer Service. It is time to replace the belt unit. Replace the belt unit. (See Replacing the belt unit on page 96.) It is time to replace the drum units. Replace the drum units. (See Replacing the drum units on page 93.) The drum unit counter was not reset when a new drum was installed. Reset the drum unit counter. (See Resetting the drum counter on page 96.) It is time to replace the drum unit Replace the drum unit for the color indicated for the indicated color. on the LCD. (See Replacing the drum units on page 93.) It is time to replace the fuser unit. Call Brother Customer Service or a Brother Authorized Service Center to replace the fuser unit. To replace Fuser Unit call Brother Customer Service at: 1-877-BROTHER (1-877-276-8437) (in USA) 1-877-BROTHER (in Canada) or to locate a Brother Authorized Service Center, visit us at: http://www.brother-usa.com/service/ 64