Brother International MFC-9010CN Users Manual - English - Page 85
Cleaning the scanner
UPC - 012502622383
View all Brother International MFC-9010CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
e Wipe the inside and the outside of the paper tray with a dry, lint-free soft cloth to remove dust. Troubleshooting and routine maintenance c In the ADF unit, clean the white bar (1) and the glass strip (2) underneath it with a soft lint-free cloth moistened with water. 1 2 f Re-load the paper and put the paper tray firmly back in the machine. g Plug the machine's power cord back into the AC power outlet first, and reconnect all cables. Turn on the machine's power switch. Cleaning the scanner C a Turn off the machine's power switch. Disconnect all cables and then unplug the power cord from the AC power outlet. b Lift the document cover (1). Clean the white plastic surface (2) and scanner glass (3) underneath it with a soft lint-free cloth moistened with water. d Plug the machine's power cord back into the AC power outlet first, and reconnect all cables. Turn on the machine's power switch. Note In addition to cleaning the scanner glass C and glass strip with a soft lint-free cloth moistened with water, run your finger tip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning. 1 2 3 73