Brother International PEDESIGN 6.0 Users Manual - English - Page 74

PeDesignV6Eng.book Page 66 Thursday, July 8, 2004 11:59 AM Creating Large-Size Embroidery Patterns 3. Embroider the selected pattern. 4. Remove the embroidery hoop from the sewing machine, and then remove the fabric from the hoop. 5. Hoop the fabric for the next pattern section. (For details, refer to "Hooping the fabric" on page 65.) b Memo: When an embroidery pattern created in a custom Design Page is saved or transferred to an original card, alignment stitching (single lines of running stitches with the color NOT DEFINED, with a pitch of 10.0 mm, and starting with securing stitches with a pitch of 0.3 mm) is added at the edges of the pattern sections. (The alignment stitching appears in the print preview and is printed in red.) Example for hooping fabric using the alignment stitching with Largelace.pes (Largelace.pes can be found in the Data folder.): 1) Embroider the upper-left pattern section. → Alignment stitching is sewn below and on the right side of the embroidered pattern section. 3) Hoop the fabric for the lower-left pattern section with the top of the hoop aligned on the alignment stitching at the bottom of the pattern section sewn in step 1, and then embroider the pattern. → Before the pattern section is embroidered, alignment stitching is sewn at the top. Make sure that this alignment stitching aligns with the alignment stitching sewn in step 1. After the pattern section is embroidered, alignment stitching is sewn on the right side of the pattern section. 4) Hoop the fabric for the lower-right pattern section with the left side of the hoop aligned on the alignment stitching on the right side of the pattern section sewn in step 3 and with the top of the hoop aligned on the alignment stitching at the bottom of the pattern section sewn in step 2, and then embroider the pattern. → Before the pattern section is embroidered, alignment stitching is sewn on the left side and at the top. Make sure that this alignment stitching aligns with the alignment stitching sewn in step 3 and in step 2. 2) Hoop the fabric for the upper-right pattern section with the left side of the hoop aligned on the alignment stitching on the right side of the pattern section sewn in step 1, and then embroider the pattern. → Before the pattern section is embroidered, alignment stitching is sewn on the left side. Make sure that this alignment stitching aligns with the alignment stitching sewn in step 1. After the pattern section is embroidered, alignment stitching is sewn below the pattern section. 6. Continue hooping the fabric and embroidering until the entire embroidery pattern is sewn. 66