Brother International S-7200B Instruction Manual - English - Page 22

Threading the upper thread, 4-6. Adjusting the stitch length

Get Brother International S-7200B PDF manuals and user guides View all Brother International S-7200B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

4. PREPARATION BEFORE SEWING 4-5. Threading the upper thread CAUTION Turn off the power switch before threading the upper thread. The machine may operate if the treadle is depressed by mistake, which could result in injury. Turn the machine pulley and raise the thread take-up (1) before threading the upper thread. This will make threading easier and it will prevent the thread from coming out at the sewing start. 3651M 4-6. Adjusting the stitch length Unlocked Locked 1. Push the dial lock lever (1) up until it clicks to release the lock. 2. Turn the stitch length dial (2) clockwise or counterclockwise so that the desired stitch length is at the uppermost position on the dial. The larger the number, the longer the stitch length will be. (The numbers on the dial are for use as a guide. The length of the finished stitches may vary depending on the type and thickness of material being sewn. Adjust while looking at the finished stitches.) When turning the stitch length dial (2) from a larger setting to a smaller setting, it will be easier to turn the dial if the reverse lever (3) is pushed to the halfwaydown position. 3. Push the dial lock lever (1) down firmly to lock it. * Check that the stitch length dial (2) does not rotate. 3652M 15 S-7200B

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
S-7200B
4. PREPARATION BEFORE SEWING
15
3652M
4-5. Threading the upper thread
CAUTION
Turn off the power switch before threading the upper thread.
The machine may operate if the treadle is depressed by mistake, which could result in injury.
Turn the machine pulley and raise the thread take-up (1)
before threading the upper thread.
This will make threading easier and it will prevent the thread
from coming out at the sewing start.
4-6. Adjusting the stitch length
1. Push the dial lock lever (1) up until it clicks to release the
lock.
2. Turn the stitch length dial (2) clockwise or counter-
clockwise so that the desired stitch length is at the upper-
most position on the dial.
y
The larger the number, the longer the stitch length will
be.
(The numbers on the dial are for use as a guide. The
length of the finished stitches may vary depending on
the type and thickness of material being sewn. Adjust
while looking at the finished stitches.)
y
When turning the stitch length dial (2) from a larger
setting to a smaller setting, it will be easier to turn the
dial if the reverse lever (3) is pushed to the halfway-
down position.
3. Push the dial lock lever (1) down firmly to lock it.
*
Check that the stitch length dial (2) does not rotate.
3651M
Unlocked
Locked