Brother International S-7200B Instruction Manual - English - Page 72
Greaseup, Dip Sw4
View all Brother International S-7200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
14. TROUBLESHOOTING Error code Err 21 (Thermistor error) Possible cause Is connector CN16 inside the control box disconnected? Insert the connector securely. Page * 3159M Err 100 This appears on the display when the sewing machine has continued to be used for a certain period after the "GrEASEUP" notification appears without the grease being (GrEASEUP) applied (without the reset procedure being carried out). Apply grease and then carry out the reset procedure. 44* Err 101 Is DIP switch No.4 inside the control box set to ON? (diP SW4) Set DIP switch No.4 to OFF. * 3160M If an error code that is not listed above appears or if carrying out the specified remedy does not solve the problem, contact the place of purchase. 65 S-7200B
S-7200B
14. TROUBLESHOOTING
65
Error code
Possible cause
Page
Err
21
(Thermistor error)
y
Is connector CN16 inside the control box
disconnected?
Insert the connector securely.
*
Err
100
(GrEASEUP)
y
This appears on the display when the sewing machine has continued to be used for
a certain period after the “GrEASEUP” notification appears without the grease being
applied (without the reset procedure being carried out).
Apply grease and then carry out the reset procedure.
44*
Err
101
(diP SW4)
y
Is DIP switch No.4 inside the control box set
to ON?
Set DIP switch No.4 to OFF.
*
If an error code that is not listed above appears or if carrying out the specified remedy does not solve
the problem, contact the place of purchase.
3160M
3159M