Brother International S-7200B Instruction Manual - English - Page 41

Setting the needle up stop position and needle down stop position

Get Brother International S-7200B PDF manuals and user guides View all Brother International S-7200B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

8. USING THE CONTROL BOX PANEL (ADVANCED OPERATIONS) 8-6. Setting the needle up stop position and needle down stop position Meaning of displays during setting • The stop position is set numerically, and "A" to "F" represent the numbers "10" to "15" respectively. • A setting value of "8" corresponds to an angle of rotation of approximately 8° for the upper shaft. Display Value A b c d E F 10 11 12 13 14 15 1 1. Press the start backtack key (4) so that " ¯ " is displayed in the top row of the stitch number display. 2. Press the end backtack key (2) to set the value. (Example: -8) Becomes higher Becomes lower Becomes higher 3151M 2 Becomes lower Set DIP switch -3 to ON. (The settings will be locked.) 3657M 1 (Example: 3) 1. Press the start backtack key (4) so that " - " is displayed in the top row of the stitch number display. 2. Press the end backtack key (2) to set the value. Becomes lower 2 Becomes higher Set DIP switch -3 to ON. (The settings will be locked.) 3152M S-7200B 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
S-7200B
8. USING THE CONTROL BOX PANEL (ADVANCED OPERATIONS)
34
8-6. Setting the needle up stop position and needle down stop position
Meaning of displays during setting
•
The stop position is set numerically, and “A”
to “F” represent the numbers “10” to “15”
respectively.
•
A setting value of “8” corresponds to an
angle of rotation of approximately 8° for the
upper shaft.
<Needle up stop position>
1
(Example: -8)
1. Press the start backtack key (4) so that “
¯
” is displayed
in the top row of the stitch number display.
2. Press the end backtack key (2) to set the value.
2
Set DIP switch -3 to ON.
(The settings will be locked.)
<Needle down stop position>
1
(Example: 3)
1. Press the start backtack key (4) so that “-” is displayed
in the top row of the stitch number display.
2. Press the end backtack key (2) to set the value.
2
Set DIP switch -3 to ON.
(The settings will be locked.)
Display
A
b
c
d
E
F
Value
10
11
12
13
14
15
Becomes higher
Becomes lower
Becomes higher
Becomes lower
3151M
Becomes lower
Becomes higher
3657M
3152M