Brother International S-7200B Instruction Manual - English - Page 25

5. USING THE OPERATION PANEL (BASIC OPERATIONS) (6) Fixed stitch key When this key is pressed so that the indicator illuminates, the number of stitches (1-1999) in the E stitch number display is sewn, and then the sewing machine stops automatically. 2143M (7) Name label key When this key is pressed so that the indicator illuminates, fixed stitch sewing of the number of stitches (1-1999) in the E and F stitch number displays is carried out repeatedly. 2144M (8) Pleat presser sewing key When this key is pressed so that the indicator illuminates, the number of backtack stitches (1-1999) in the E stitch number display can be sewn by pressing the actuator. 2145M (9) Thread trimming key • This can only be set for use together with the fixed stitch key (6) or the name label key (7). • When this key is pressed so that the indicator illuminates, the set number of stitches (start or end backtack stitches or fixed stitches) are sewn, and then the thread is trimmed automatically. 2146M (10) AUTO key • This can only be set for use together with the continuous backtack key (5), the fixed stitch key (6) or the name label key (7). • When this key is pressed so that the indicator illuminates, the set number of stitches (start or end backtack stitches, fixed stitches or thread trimming) are sewn automatically simply by depressing the treadle once. 2147M (11) Sewing speed control display This shows the sewing speed when the treadle is depressed to the maximum amount. • If all bars are illuminated, it indicates that the maximum speed can be set. • If all bars are switched off, it indicates the minimum speed (220 rpm). 2148M (12) Sewing speed control keys These keys let you adjust the sewing speed that is used when the treadle is depressed to the maximum amount. The sewing speed can also be adjusted while sewing is in progress. • When the key is pressed, the sewing speed becomes faster. • When the key is pressed, the sewing speed becomes slower. 2149M 2150M 2151M (13) Thread trimming lock key • When this key is pressed so that the indicator illuminates, the sewing machine stops in the needle up position without thread trimming being carried out even if the treadle is depressed backward. • If the indicator of the AUTO key (10) is illuminated, the sewing machine stops in the needle up position without thread trimming being carried out after the set number of stitches have been sewn. 2152M (14) Half stitch key When the sewing machine is stopped, the needle bar can be moved up and down by pressing this key. 2153M (15) Lower thread counter display This shows the lower thread counter value. The counter is reduced by "1" for every ten stitches sewn. 2154M (16) Lower thread counter keys These keys are used to set the initial value for the lower thread counter. (Refer to p.24.) 2155M (17) RESET key This key is used to return the lower thread counter to its initial value and to cancel warning conditions. (Refer to p.24.) 2156M S-7200B 18