Brother International S-7200B Instruction Manual - English - Page 31
Using the lower thread counter, USING THE OPERATION PANEL BASIC OPERATIONS
View all Brother International S-7200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 5-7. Using the lower thread counter The lower thread counter can be used to let you know approximately how much lower thread is remaining. The value displayed by the lower thread counter display is reduced by 1 from the initial setting value each time the sewing machine sews 10 stitches, and a warning is given when the counter reaches "-5". 1 After about 2 seconds, the buzzer will sound and the lower thread counter display will show the initial value which was set previously. (Press for 2 seconds or more) 2 When the key is pressed, the setting increases. When the key is pressed, the setting decreases. If you hold down the keys, the setting will change more quickly. If a value of "0" is set, the lower thread counter will not operate. The initial setting value will be accepted when sewing starts. 2166M (Initial value) Reduces by 1 for every 10 stitches sewn 2167M 2168M 2169M Press the RESET key (2). Press the RESET key (2) for 2 seconds or more. 2170M 1. When sewing is carried out, the value shown in the lower thread counter display is reduced by 1 for every 10 stitches sewn. (After the value reaches zero "0", a minus sign appears and counting continues to a maximum of "-999".) 2. When the value is "-5" or less, a warning icon (1) illuminates and an electronic buzzer sounds for 5 seconds. 3. After the treadle returns to the neutral position and the sewing machine stops, the sewing machine will not start up again even if the treadle is depressed. However, thread trimming can be carried out by depressing the treadle backward. If you press the RESET key (2), the warning icon (1) will disappear and sewing will be possible when the treadle is depressed. If you press and hold the RESET key (2) for 2 seconds or more, the display will return to the initial value. S-7200B 24