Canon EOS Rebel T4i Instruction Manual - Page 120

3 Auto Exposure BracketingN Canceling AEB Follow steps 1 and 2 to turn off the AEB level display. The AEB setting will also be canceled automatically if the power switch is set to , flash recycling is completed, etc. Shooting Tips Using AEB with continuous shooting If continuous shooting (p.101) is set and you press the shutter button completely, the three bracketed shots will be taken continuously in this sequence: standard exposure, decreased exposure, and increased exposure. Using AEB with single shooting Press the shutter button three times to take the three bracketed shots. The three bracketed shots will be exposed in the following sequence: standard exposure, decreased exposure, and increased exposure. Using AEB with the self-timer or a remote controller (sold separately) With the self-timer or a remote control shooting ( or ), you can take three continuous shots after a 10-sec. or 2-sec. delay. With (p.103) set, the number of continuous shots will be three times the number set. 120 AEB cannot be used with flash, [Multi Shot Noise Reduction], or bulb exposures. If [z2: Auto Lighting Optimizer] (p.123) is set to any setting other than [Disable], the AEB's effect may be minimal.