Canon EOS Rebel T4i Instruction Manual - Page 156
Focus the subject., Take the picture., Display the Live View image., FlexiZone - Single
View all Canon EOS Rebel T4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Changing the Autofocus Method (AF Method) 3 Focus the subject. Aim the AF point over the subject and press the shutter button halfway. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the area frame will turn orange. 4 Take the picture. Check the focus and exposure, then press the shutter button completely to take the picture (p.144). When the camera does not focus the desired target subject with automatic AF point selection, switch the AF method to zone selection or [FlexiZone - Single], and refocus. Depending on the aspect ratio setting, the number of AF points will differ. At [3:2], there will be 31 AF points. At [1:1] and [4:3], there will be 25 AF points. And at [16:9], 21 AF points. Also, at [16:9], there will be only three zones. For movie shooting, there will be 21 AF points (or 25 AF points if [640x480] is set) and three zones (or 9 zones if [640x480] is set). FlexiZone - Single: d Since only one AF point is used to focus, you can focus the target subject. AF point 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. X The AF point < > will appear. During movie shooting, if [Movie servo AF] is set to [Enable], the AF point will be displayed in a larger size. 156