Canon EOS Rebel T4i Instruction Manual - Page 323
The Auto Lighting Optimizer cannot be set.
View all Canon EOS Rebel T4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
Troubleshooting Guide The maximum burst during continuous shooting is lower. With ISO 12800 or "H" (equivalent to ISO 25600), the maximum burst for continuous shooting will greatly decrease (p.91). Set [z3: High ISO speed NR] to [Standard/Low/Disable]. If it is set to [High] or if [Multi Shot Noise Reduction] is set, the maximum burst during continuous shooting will greatly decrease (p.124). With [Chromatic aberration: Enable], the maximum burst for continuous shooting will greatly decrease (p.128). During WB bracketing, the maximum burst for continuous shooting will decrease (p.138). If you shoot something that has fine detail (such as a field of grass), the file size will be larger and the actual maximum burst may be lower than the number mentioned on page 87. ISO 100 cannot be set. Under [54: Custom Functions (C.Fn)], if [3: Highlight tone priority] is set to [1: Enable], ISO 100 cannot be set. If [0: Disable] is set, ISO 100 can be set (p.295). This also applies to movie shooting (p.174). ISO speed [H] (ISO 25600) cannot be set. Under [54: Custom Functions (C.Fn)], if [3: Highlight tone priority] is set to [1: Enable], the [H] ISO speed (25600) cannot be selected even when [2: ISO expansion] is set to [1: On]. If [0: Disable] is set for [3: Highlight tone priority], [H] can be set (p.294). The Auto Lighting Optimizer cannot be set. Under [54: Custom Functions (C.Fn)], if [3: Highlight tone priority] is set to [1: Enable], the Auto Lighting Optimizer cannot be set. If [0: Disable] is set, the Auto Lighting Optimizer can be set (p.295). 323