Canon GL1 GL1 Instruction Manual - Page 27
Built-in speaker and headphone terminal - camcorder review
View all Canon GL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Quick Overview Indicators that appear in the LCD display when "mirror" is selected: E REC REC PAUSE EJECT • All indicators appear normally in the viewfinder. Built-in speaker and headphone terminal The camcorder has a built-in speaker and a headphone terminal so you can review the sound track alongside the picture during playback. Use the speaker or headphones when viewing playback with the LCD screen, and use headphones when viewing with the viewfinder. The built-in speaker is monaural; use headphones for stereo sound. VOLUME Adjust the speaker and headphone volume with the +/- VOLUME buttons. • Press the + button to increase the volume, and the - button to lower the volume. • A VOLUME bar appears in the display to indicate the current volume. It disappears in four seconds. • You can turn off the volume completely by pressing the - button until OFF appears. • You can also adjust the headphone volume separately from the built-in speaker, either during VCR mode or camera mode. The volume level is the same regardless of mode. • The levels you adjust for the built-in speaker and headphones are memorized separately. The camera remembers your levels even if you slide the POWER switch to OFF. Notes: • The speaker turns off when the camera is set to camera mode or when you use headphones. • Sometimes the playback picture becomes rough with "noise", when the volume is turned up high. If this happens, turn down the volume. 27