Canon HR10 User Manual - Page 101
Additional Information - lcd screen replacement
UPC - 013803079555
View all Canon HR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Additional Information This chapter contains troubleshooting advice, screen messages, handling and maintenance tips, and other information. Trouble? Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Solution • Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery pack. 23 • The camcorder switches off by itself. • The disc compartment cover will not open. Attach the battery pack correctly. • LCD/viewfinder switches on and off. The charge indicator flashes rapidly Charging has stopped because the compact power adapter or the battery - (approx. twice per second) pack is faulty. Consult a Canon Service Center. • Battery pack will not charge. Charge the battery pack in temperatures between 0 °C and 40 °C (32 °F - • The charge indicator flashes very and 104 °F). slowly (about once every 2 seconds). Battery packs become hot with use and may not charge. When the battery - pack is outside the charging temperature range, the CHG (charge) indicator will flash irregularly. The charging will start once the battery pack temperature is below 40 °C (104 °F). The battery pack is damaged. Use a different battery pack. - Recording/Playback Problem Solution Buttons will not work. Turn on the camcorder. - Load a disc. 32 Abnormal characters appear on the Disconnect the power source and reconnect it after a short time. If the - screen. The camcorder does not problem still persists, disconnect the power source and press the RESET operate properly. button with a pointed item. Pressing the RESET button resets all settings. appears on the screen. Load a disc and close the disc compartment cover. 32 lights up in red. Battery pack is exhausted. Replace or charge the battery pack. 23 The wireless controller will not work. Set [WL.REMOTE] to [ON]. 52 Replace the battery of the wireless controller. 25 101