Canon HR10 User Manual - Page 31
Getting Ready to Start, Recording
UPC - 013803079555
View all Canon HR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Getting Ready to Start Recording Getting Ready to Start Recording Adjusting the Position and Brightness of the LCD Screen Rotating the LCD Panel Open the LCD panel 90 degrees. • You can rotate the panel 90 degrees downward. • You can rotate the panel 180 degrees toward the lens (allowing the subject to monitor the LCD screen while you use the viewfinder). Rotating the panel 180 degrees is also useful if you wish to include yourself when recording with the self timer. This is the only case where you can use the viewfinder and the LCD screen simultaneously. NOTES About the LCD and viewfinder screen: The screens are produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction. LCD Backlight You can set the brightness of the LCD screen to normal or bright. 180° 90° 180° Hold DISP. pressed down for more than 2 seconds. Repeat this action to toggle between the normal and bright settings. NOTES • This setting does not affect the brightness of the recording or the viewfinder screen. • Using the bright setting will shorten the effective usage time of the battery pack. Subject can monitor the LCD screen 31