Canon HR10 User Manual - Page 39
Quick Start Function
UPC - 013803079555
View all Canon HR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
• You can also use the T and W buttons on the wireless controller or the LCD panel. The zoom speed will be the same as with the camcorder or fixed at [ SPEED 3] (when [ VARIABLE] is selected). • When set to [ VARIABLE], the zoom speed will be faster in record pause mode. Quick Start Function When you press QUICK START the camcorder enters the standby mode. In standby mode the camcorder consumes only about half the power used when recording, saving energy when you are using a battery pack. Additionally, when you press QUICK START again the camcorder is ready to start recording within approx. 1 second, ensuring you do not miss important shooting opportunities. POINTS TO CHECK ( 26) then stays on when it enters the standby mode. 2 When you wish to resume recording, press QUICK START again. Within approx. 1 second, the camcorder is ready in record pause mode. NOTES • When you wake up the camcorder from standby mode, the following settings will be changed automatically: - Manual focus returns to automatic focus (AF). - Manual exposure adjustment returns to automatic exposure. - Zoom position returns to full wide angle W. • The camcorder will shut off if left in standby mode for 10 minutes, regardless of the [POWER SAVE] setting ( 52). You can select the length of time until shut-off with the [ STANDBY OFF] setting ( 53). To restore the power if the camcorder shut off, slide the switch toward MODE and release it, or move the switch to and back to ON again. • If you perform any of the following actions while in standby mode (while the standby lamp is on), the camcorder will return to record pause mode. - Open the disc compartment cover. - Change the position of the / switch. - Slide the switch toward MODE. 1 Press QUICK START firmly. The standby lamp flashes at first while the camcorder is preparing and 39