Canon HR10 User Manual - Page 109
Could Not Print X Images
UPC - 013803079555
View all Canon HR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Message INK ERROR NO INK LOW INK LEVEL INK ABSORBER FULL • FILE ERROR • CANNOT PRINT! COULD NOT PRINT X IMAGES SET PRINT ORDER PRINT ORDER ERROR CANNOT TRIM READJUST TRIMMING PRINTER ERROR PRINT ERROR HARDWARE ERROR COMMUNICATION ERROR CHECK PRINT SETTINGS INCOMPATIBLE PAPER SIZE PRINTER IN USE PAPER LEVER ERROR PRINTER COVER OPEN NO PRINTHEAD Explanation There is a problem with the ink. Replace the ink cartridge. The ink cartridge is not inserted or is out of ink. The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing. Select [CONTINUE] to resume printing. Consult a Canon Service Center (refer to the list included with the printer) to replace the ink absorber. You attempted to print an image that was recorded with another camcorder, has a different compression, or was edited on a computer. You attempted to use the print order settings to print X images that were recorded with another camcorder, with a different compression or were edited on a computer. No still image on the memory card has been marked with a print order. You attempted to set more than 998 still images in the print order. You attempted to trim an image that was recorded with another camcorder. You changed the [PAPER] settings after applying the trimming settings. Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the error still persists, refer to the printer's instruction manual and contact the appropriate customer support center or service center. Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable. Check the printer status. When you are printing using the button, check the print settings. Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the printer is equipped with a battery, it might be exhausted. In such case, turn off the printer, replace the battery and turn it back on. The printer is experiencing a data transfer error. Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable. When you are printing using the button, check the print settings. Or, you attempted to print from a memory card that contains a large number of images. Reduce the number of images. Current print settings cannot be used for printing with the button. The paper settings of the camcorder conflict with the printer's settings. The printer is in use. Check the printer status. Paper lever error occurred. Adjust the paper selection lever to the proper position. Close the printer cover securely. No print head is installed in the printer or the print head is defective. 109