Canon HR10 User Manual - Page 72
Photos
UPC - 013803079555
View all Canon HR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Photos Refer to this chapter for details on shooting photos - from capturing and playing back images to printing them. Basic Recording Basic Recording Taking Photos Before using a memory card for the first time, be sure to initialize it with this camcorder ( 84). ( 26) 1 Move the switch to ON to set the camcorder in CAMERA mode. The red CAMERA indicator will turn on. 2 Move the / switch to (Still images). 3 Press PHOTO halfway. • Once the focus is automatically adjusted, will turn green and one or more AF frames will appear. • When you press PHOTO on the wireless controller, the still image is recorded immediately. 4 Press PHOTO fully. The CARD access indicator will flash as the still image is being recorded. IMPORTANT Avoid the following actions while the card access display ( ) appears on screen, and when the CARD access indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not subject the camcorder to vibrations or strong impacts. - Do not open the memory card slot cover and do not remove the memory card. - Do not disconnect the power source or turn off the camcorder. - Do not change the position of the / switch or the operating mode. NOTES • If the subject is not suitable for autofocus, turns yellow. Adjust the focus manually ( 59). • When the subject is too bright, "OVEREXP." starts flashing. In such case, use the optional FS-H37U ND filter. 72