Canon HR10 User Manual - Page 102
Recording
UPC - 013803079555
View all Canon HR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Additional Information Problem Solution Video noise appears on screen. When using the camcorder close to devices that emit strong - electromagnetic fields (plasma TVs, cellular phones, etc.), keep a distance between the camcorder and these devices. Video noise appears on the TV screen. When using the camcorder in a room where a TV is located, keep a - distance between the compact power adapter and the power or antenna cables of the TV. Even without a disc loaded, when The camcorder is checking if a disc is loaded or not. This is not a - closing the disc compartment cover a malfunction. motor sound can be heard. Cannot open the disc cover to remove Turn off the camcorder, disconnect the compact power adapter and - the disc. remove the battery pack. Restore the power supply and try again. The camcorder has exceeded its operational temperature. Turn off the camcorder and let it cool down before resuming use. The disc cannot be recognized. The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If the 111 problem persists replace the disc. The disc is not correctly loaded. Check the disc. 32 Verify that the camcorder supports the type of DVD disc you inserted. 5 The camcorder vibrates. Depending on the condition of the disc, the camcorder might vibrate - occasionally. This is not a malfunction. • The disc's rotation can be faintly The disc is activated from time to time. This is not a malfunction. - heard. • Occasionally the operation sound can be heard. • After using the camcorder for a long time, it becomes hot. • lights up in red. This is not a malfunction. Turn the camcorder off and let it cool for a while - before resuming operation. Recording Problem Solution flashes red on the screen. The camcorder has malfunctioned. Consult a Canon Service Center. - Horizontal bands appear on the screen. This is a phenomenon typical of CMOS image sensors when recording - under some types of fluorescent, mercury or sodium lamps. To reduce the symptoms set the mode switch to AUTO. This is not a malfunction. When a subject flits across in front of This is a phenomenon typical of CMOS image sensors. When a subject - the lens, the image appears slightly crosses very quickly in front of the camcorder, the image may seem bent. slightly warped. This is not a malfunction. Image will not appear on the screen. Set the camcorder to mode. 35 102