Canon HR10 User Manual - Page 106
List of Messages
UPC - 013803079555
View all Canon HR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Additional Information Printing Problem Solution The printer is not operating even Disconnect the USB cable and turn off the camcorder and the printer. After - though the camcorder and printer are a short while, turn them on again, set the camcorder to mode correctly connected. and restore the connection. Others Problem A rattling can be heard from the camcorder. Solution The internal lens fixture can move when the camcorder is turned off. This - is not a malfunction. List of Messages Message Explanation CHANGE THE BATTERY PACK Battery pack is exhausted. Replace or charge the battery pack. 23 CANNOT ENTER THE STANDBY MODE NOW The camcorder cannot enter the standby mode while the disc is being 39 recognized after first inserting it or if the remaining battery charge is too low. UNABLE TO RECOGNIZE THE You inserted a type of disc not supported by this camcorder. 5 RECORDING MODE OF THE DISC The disc may not be recognized by this camcorder if it was initialized or - recorded using a different device. You inserted a disc recorded in a different television system (PAL or SECAM). - • TEMPERATURE TOO HIGH CANNOT RECORD • TEMPERATURE TOO HIGH CANNOT REMOVE DISC The camcorder has exceeded its operational temperature. Disconnect the - compact power adapter and remove the battery pack. Let the camcorder cool down before resuming use. • CANNOT RECORD • CANNOT RECORD CHECK THE DISC There is a problem with the disc. Replace the disc. 32 This message can also appear if condensation has formed. Wait until the 114 camcorder dries completely before resuming use. The disc's recording surface may be dirty or scratched. - REACHED THE MAXIMUM NUMBER OF SCENES The maximum number of scenes has been reached. Delete some recordings 43 (DVD-RW in HD quality, or SD quality (VR mode)) to free some space or replace the disc. CANNOT PLAY DISC The disc is dirty or you attempted to play back a type of disc not supported by 5 this camcorder. This message can also appear if condensation has formed. Wait until the 114 camcorder dries completely before resuming use. 106