Canon HR10 User Manual - Page 103
Playback/Editing
UPC - 013803079555
View all Canon HR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Problem Solution Pressing START/STOP will not start Set the camcorder to mode. 35 recording. Load a recommended disc. 7 The disc is full (" END" appears on the screen). Delete some recordings 43 (DVD-RW in HD quality, or SD quality (VR mode)) to free some space or replace the disc. The camcorder has exceeded its operational temperature. Turn off the - camcorder and let it cool down before resuming use. Remove the disc protection. 66 Unfinalize the disc (DVD-RW in HD quality, or SD quality (VIDEO mode)). 71 Even after stopping recording, the The scene is being recorded on the disc. This is not a malfunction. 35 DISC access indicator does not go off. The point where START/STOP was pressed does not match the beginning/end of the recording. There is a slight interval between pressing START/STOP and the actual start - of recording on the disc. This is not a malfunction. The recording suddenly stops shortly The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If the 111 after starting recording. problem persists replace the disc. The camcorder has exceeded its operational temperature. Turn off the - camcorder and let it cool down before resuming use. Camcorder will not focus. Autofocus does not work on the subject. Focus manually. 59 Adjust the viewfinder with the dioptric adjustment lever. 36 Lens is dirty. Clean the lens with a soft lens-cleaning cloth. Never use 113 tissue paper to clean the lens. Sound is distorted. When recording near loud sounds (such as fireworks or concerts), sound - may become distorted. This is not a malfunction. Viewfinder picture is blurred. Adjust the viewfinder with the dioptric adjustment lever. 36 Playback/Editing Problem Solution Pressing the playback button does Load a disc. 32 not start playback. Set the camcorder to mode. 41 Do not insert into the camcorder discs that were initialized, recorded or - edited using another DVD device. If using a single-sided disc, check that the disc is inserted with the label 32 side facing up. The camcorder has exceeded its operational temperature. Turn off the - camcorder and let it cool down before resuming use. • During playback there is video The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 111 noise and the sound is distorted. • The disc cannot be read. Do not insert into the camcorder discs that were initialized, recorded or edited using another DVD device. - 103