Canon HR10 User Manual - Page 25
Using the Wireless Controller, When you mount the camcorder on a, tripod
UPC - 013803079555
View all Canon HR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
finger, and the START/STOP button with your thumb. Using the Wireless Controller First, insert the supplied lithium button battery CR2025 into the wireless controller. Tab 1 Press the tab in the direction of the arrow and pull out the battery holder. 2 Place the lithium button battery with the + side facing up. 3 Insert the battery holder. situated under strong light sources or direct sunlight. • If the wireless controller does not work, check that [WL.REMOTE] is not set to [ OFF ] ( 52). Otherwise, replace the battery. When you mount the camcorder on a tripod Do not leave the viewfinder exposed to direct sunlight as it may melt (due to concentration of the light by the lens). Do not use tripods with fastening screws longer than 5.5 mm (0.2 in.). Doing so may damage the camcorder. Point the wireless controller at the camcorder's remote sensor when you press the buttons. NOTES • The wireless controller may not work properly when the remote sensor is 25